(press the buttons above to move around the site)
This is a first. Luigi made a movie of his winch powered AFAB Table Lift. Cool!!
Watch Lift Movie
and pictures below:
Below is the text Luigi sent:
Thanks for the compliments on my bike lift, I am a chef and to be able to produce such a quality table as this, it was only possible with your easy to follow plans. I made a few changes in the materials and lifting method used but the design is the same. I also introduced LED lights to the deck which now turns the lift from a work table to a show piece at the flick of a switch. (I actually have them on a timer to come every night). My mates now want me to build them one. (I don’t think so)
Below is the text Luigi sent on the winch and cable:
"The winch is a mile marker PE 3500 with a 1350 kg line pull. I positioned and welded 2 lengths of 50mill by 25mill side by side just behind where the trolley jack would sit when in the raised position and welded an anchor point on the rear table uprights and ran the cable back to another anchor point on the same support the winch is bolted to and then ran the cable back to the rear upright. The reason for this is that the travel distance to lower and raise the table is very short so by doubling the cable in this fashion slows the tables speed down in which it raises and lowers and secondly reduces the load or doubles the working load of the winch, it is sort of a win win situation."
I've seen enough, take me to the Order Page.
Phone (775) 588-6074 (8 to 5 PST, M-F only)